Intech Industrial safety helmet

The Intech Industrial safety helmet EN 397 standard Which indicates physical and execution prerequisites, strategies of test and stamping prerequisites for mechanical security protective caps. Mechanical security protective caps are planning essentially to give assurance to the wearer against falling objects and considerable brain damage and cranium break. The primary characteristics that recognize these defensive gadgets are: the capability of retaining blows, cut resistance, resistance to rain and daylight, resistance to chemical operators and combustibility, dielectric properties.

The necessities of Intech Industrial safety helmet:

Impact resistance: Helmet constrain transmitted to the head ≤5.0 kN with affect vitality 49 J (a mass of 5 kg falling from a tallness of 1 meter).
Penetration resistance: no entrance with affect vitality 29 J (a mass of 3 kg falling from a tallness of 1 meter).
Flame resistance: no harm after introduction to the fire for 5 seconds;
Resistance to moo temperature (-20 °C or -30 °C): affect and entrance resistance at a temperature of -20 °C or -30 °C. Discretionary requirement.
Resistance to tall temperature (+150 °C): affect and entrance resistance at a temperature of 150 °C (discretionary requirement).
Electrical properties (440 V AC): spillage current ≤1.2 mA at a voltage of 1,200 V AC (discretionary requirement).
Lateral miss happening (LD) ≤40 mm and remaining distortion ≤15 mm, when subject to a dynamic stack up to 430 N. Discretionary requirements.
Molten metal sprinkles (MM): no harm after contact with 150 g of liquid press (discretionary requirement).